Using And Programming Schedules - Daikin Intergas Altherma Hybrid User Reference Manual

4 | Operation

4.7.2 Using and programming schedules

User reference guide
38
Control
Elec price High
Medium
Low
Fuel price
About schedules
Depending on your system layout and installer configuration, schedules
(predefined and/or user‑defined) for multiple controls may be available.
You can:
▪ Select which schedules you currently want to use.
▪ Program your own schedules if the predefined schedules are not satisfactory.
The actions you can program are control specific.
Possible actions per control
Control
Room temperature
Main leaving water
temperature
DHW tank temperature Program when to heat up the DHW tank:
Quiet mode
(Only for field
supplied domestic hot
water pump for
secondary return)
Domestic hot water
pump
Electricity price
(a) Start heating up until the desired setpoint (Comfort/Eco) is reached.
(b) Stop heating, even if the desired temperature is not reached yet; example: if electric
tariffs are higher during the day, you can program a stop at 06:00.
Preset value
Used when the savings mode
(installer setting) is set to
Economical.
Used when the savings mode
(installer setting) is set to
Economical.
Possible actions
Program when to heat up a space:
▪ Comfort (preset value)
▪ Eco (preset value)
▪ [Custom temperature]
▪ Storage comfort (preset value)
▪ Storage eco (preset value)
(b)
▪ Storage stop
Program when the unit has to use which quiet mode
level:
▪ Level 1
▪
Level 2
▪ Level 3
▪ OFF
Program when the domestic hot water pump is turned
ON and OFF.
Program when a certain electricity tariff is valid.
Where used
(a)
(a)
EJHA04AAV3 + NHY2KOMB28+32AA
Daikin Altherma Hybrid hydrosplit heat pump
4P556862-1A – 2020.10