Table of Contents
Advertisement
4
|
Operation
4.4.10 External room thermostat control - About external room thermostat control
4.4.11 External room thermostat control - Using external room thermostat control
To adjust the leaving water temperature (main)
4.5 Domestic hot water control
4.5.1 About domestic hot water control
4.5.2 Instant DHW (no tank installed)
User reference guide
24
2 Press
or
to adjust. Example:
External room thermostat control means that you control the following:
▪
Room temperature on the external thermostat control
▪
Leaving water temperature on the user interface (Daikin)
To control the leaving water temperature, you can do the following:
You can...
Read out the desired leaving water temperature.
Adjust the desired leaving water temperature.
Only change this if the desired room temperature
cannot be reached.
See also:
"Room thermostat control - Using the leaving water temperature home
4
pages" [
21]
1 Go to the main leaving water temperature home page (LWT main).
2 Press
or
to adjust. Example:
NOTICE
Disinfection mode. Even if you turn OFF domestic hot water operation via the
DHW tank temperature home page (Tank), disinfection mode will remain active.
Your system layout may or may not contain a domestic hot water tank. When no
tank is installed, the boiler provides domestic hot water instantly. When, on the
contrary, a tank is installed, domestic hot water control is different depending on
the DHW tank mode set by the installer:
▪
Reheat mode
▪
Scheduled mode
▪
Scheduled + reheat mode
Not applicable for Switzerland
When there is a demand for hot water tapping, the boiler provides DHW instantly.
35°C 37°C
Leaving water
temperature home page
(main)
35°C 37°C
EJHA04AAV3 + NHY2KOMB28+32AA
Daikin Altherma Hybrid hydrosplit heat pump
Location
4P556862-1A – 2020.10
Advertisement
Table of Contents
