Room Thermostat Control - Using The Leaving Water Temperature Home - Daikin EHFZ-D3V User Reference Manual

4.4.6 Room thermostat control - Using the leaving water temperature home pages
Typical leaving water temperature home pages
To read out the desired leaving water temperature (main + additional)
To adjust/overrule the leaving water temperature (NOT linked to room temperature setpoint)
EHFZ03S18DJ3V
Daikin Altherma 3 R F
4P596825-1A – 2021.10
INFORMATION
The leaving water is the water that is sent to the heat emitters. The desired leaving
water temperature is set by your installer in accordance with the heat emitter type.
Example: A home screen is available for both temperature zones: the main zone and
the additional zone. You only have to adjust the leaving water temperature settings
in case of problems.
Main zone:
User profile = Basic
35°C
Desired temperature
Additional zone:
User profile = Basic
45°C
Desired temperature
Go to the leaving water temperature home page (LWT main or LWT add).
INFORMATION
To see if the leaving water temperature setpoint is linked to the room temperature
setpoint, see "4.4.3 Determining which temperature control you are
To adjust the leaving water temperature (main)
1 Go to the main leaving water temperature home page (LWT main).
2 Press or to adjust. Example:
INFORMATION
In case of weather dependency, an offset value can be modified.
To adjust the leaving water temperature (additional)
1 Go to the additional leaving water temperature home page (LWT add).
2 Press or to adjust. Example:
User profile = Detailed
15:20
Mon
35°C
LWT main
Desired temperature
Mon
User profile = Detailed
Mon 15:20
45°C
LWT add
Desired temperature
Mon
35°C 37°C
45°C 47°C
4 Operation
|
Mon 15:20
LWT main
17:30
Mon 15:20
LWT add
17:30
4
using" [ 19].
User reference guide
25