Table of Contents
Advertisement
Installing the Projector
Horizontal center
of the screen
The distance between the lens and the screen varies depending
on the size of the screen. Use the following table as a guide.
Screen size (inches)
40
Minimum 1.5 (4.9) 2.3 (7.5) 3.1 (10.1) 3.9 (12.7) 4.7 (15.4) 5.9 (19.3) 7.1 (23.2) 7.9 (25.8) 9.9 (32.3) 11.9 (38.9)
Distance
Maximum 2.3 (7.7) 3.5 (11.5) 4.7 (15.5) 5.9 (19.3) 7.1 (23.3) 8.9 (29.3) 10.7 (35.1) 11.9 (39.2) 15.0 (49.0) 18.0 (58.9)
For detailed information on installation measurements, see page 35 (EN).
16
(EN)
This section describes the installation arrangements for installing the
projector on a table. For ceiling installation, consult with qualified Sony
personnel (see page 36 (EN)).
Vertical
center of
the screen
Installation
area
Projection distance
60
80
100
Install the projector so that the tip of the lens is
within this area.
Adjust the vertical and horizontal positioning of the
projector.
Vertical positioning (side view)
Screen
You can adjust the angle of the lens by adjusting the
SHIFT +/– keys (page 20 (EN)) or PICTURE SHIFT
in the SET SETTING menu (page 29 (EN)).
Set the projector so that the center of the lens is
between just below the bottom edge of the screen
and the center of the screen.
Horizontal positioning (top view)
Screen
Adjust the horizontal positioning of the projector so that the
lens is aligned with the horizontal center of the screen.
120
150
180
Adjustable range
Center of the unit
56 mm
1
(2
/
inches)
4
Center of the lens
Unit: m (feet)
200
250
300
Advertisement
Table of Contents
