Table of Contents
Advertisement
Installing the Projector
Horizontal center
of the screen
The distance between the lens and the screen varies
depending on the size of the screen. Use the following table
as a guide.
Screen size (inches)
40
Minimum 1.5 (4.9) 2.3 (7.5) 3.1 (10.1) 3.9 (12.7) 4.6 (15.2) 5.8 (19.1)
Distance
Maximum 1.9 (6.2) 2.9 (9.4) 3.9 (12.7) 4.8 (15.9) 5.8 (19.2)
For detailed information on installation measurements, see page 33 (EN).
This section describes the installation arrangements for installing the
projector on a table. For ceiling installation, consult with qualified Sony
personnel (see page 34 (EN)).
Adjust the vertical and horizontal positioning of the projector.
Vertical positioning (side view)
Horizontal positioning (top view)
Install the projector to be level.
Avoid followings which may cause malfunction.
• The projector topples over on its side.
• The projector titles more than 20 degrees.
20 degrees
60
80
100
Screen
Adjust the height of the projector so that the center of
the lens is just above the bottom edge of the screen.
Screen
Adjust the horizontal positioning of the projector so that the lens
is aligned with the horizontal center of the screen.
Note
20 degrees
120
150
180
7.0 (23)
7.3 (24)
8.8 (28.9) 9.8 (32.1) 12.2 (40.2) 14.7 (48.4)
Center of
the lens
57.5 mm
(2
3
/
8
inches)
Center of
the unit
20 degrees
Unit: m (feet)
200
250
300
7.8 (25.6)
9.7 (32)
11.7 (38.5)
17
(EN)
Advertisement
Table of Contents
