Korg Soundlink DRS OASYS PCI User Manual page 50

Using Audio Programs
2.
The audio channel will now be routed to the OASYS PCI Send Bus.
Routing audio directly to the OASYS PCI outputs
You can route up to 12 channels of audio from the digital audio program directly
to the OASYS PCI's outputs, without passing through the OASYS PCI mixer. To do
this:
1.
That's it!
If the digital audio program offers only stereo outputs, you can still use hard-
panning to send discrete, mono signals.
Different routing options
Since OASYS PCI and most digital audio programs all offer a large degree of
flexibility in signal routing, you can use channel effects either as in-line inserts, or
as sends from a digital audio program or external mixer.
For instance, you can route a hard-disk track directly to an OASYS PCI mixer
channel, for individual insert processing.
Or, you can create an output bus in the digital audio program, and route several
tracks at once through an OASYS PCI mixer channel, for group insert processing
(like an output bus).
Finally, you can create a send bus in the digital audio program, and route that send
bus to an OASYS PCI mixer channel, or to an OASYS PCI send bus. In either case,
the dry signal from the digital audio can then be routed completely separately
from the OASYS PCI effects processing.
Recording directly from the OASYS PCI inputs
The OASYS PCI feature a total of 12 audio inputs - stereo analog, stereo S/PDIF,
and 8-channel ADAT optical. With compatible ASIO or MME audio software, you
can record from all of the inputs simultaneously.
To record from the audio inputs:
1.
For information on how to open the ASIO control panel/Audio Settings window,
please see "ASIO Control Panel/ Audio Settings," on page 123.
2.
3.
The audio inputs will now be routed to the audio program's inputs.
46
In the OASYS PCI Editor's Send Busses window, set the Send Bus's input
to the Stream you selected in Step 1.
In the audio program, assign the audio channel's output to an output:
Analog L-R, S/PDIF L-R, ADAT 1-2, ADAT 3-4, ADAT 5-6, and ADAT 7-8.
From the digital audio program, open the OASYS PCI ASIO control
panel/Audio Settings window.
Under Record Source, select Audio Inputs.
Press OK to close the window.
Using the OASYS PCI
OASYS PCI