Korg Soundlink DRS OASYS PCI User Manual page 37

Using the OASYS PCI
The Control Panel changes will be recorded as SysEx messages in the record-
enabled track.
7.
8.
If you have enabled "Update Control Panel from MIDI," as described above, then
you will see the Control Panel change as the automation plays.
SysEx Messages are tied to Channel and slot
The System Exclusive messages are tied to the particular Mixer Channel/Send
Bus/Output Bus and Slot, so that messages from Effect 2 on Channel 3 are separate
from those of Effect 4 on Channel 7. If you move a Program, Patch, or Effect to a
new slot or Channel, Send Bus, or Output Bus, previously recorded System
Exclusive messages will no longer work properly.
Changing the MIDI Channel used by the Mixer Channel, Send Bus, or Output Bus
will not affect the System Exclusive messages; they will continue to work as they
did before.
SysEx format
For low-level details on the OASYS PCI System Exclusive format, please see "MIDI
System Exclusive Format" on page 139.
Mixer parameters have preset modulation routings
All parameters in the Mixer, Send Bus, and Output Busses windows have built-in
MIDI modulation routings, as shown in the chart below.
OASYS PCI
When you are finished, switch back to the sequencer and stop recording.
Play back the sequence to hear the recorded automation.
Mixer parameter
Volume
Width
Pan
MIDI Controller #
7
8
10
Using Modulation
Notes
Sets the maximum volume
of the channel. This is
modified by Expression, as
described below.
64 is absolute center;
0 is hard left;
127 is hard right
33