Korg Soundlink DRS OASYS PCI User Manual page 116

File Menu
Connect/Disconnect
This command controls the connection between the OASYS PCI Editor and the
OASYS PCI Engine. It switches between Connect and Disconnect, depending on
the current state of the connection.
Connect causes the OASYS PCI Editor to hook up to the OASYS PCI Engine. If the
OASYS PCI Engine is not already running, it will start up.
Disconnect causes the OASYS PCI Editor to un-hook from the OASYS PCI Engine.
If the OASYS PCI Editor is the only program using the OASYS PCI Engine, then
the Engine will quit, freeing system memory for other applications.
Play
This command starts the active Multi, if it has previously been stopped.
Stop
This command stops the active Multi. It can be used as a "Panic" or all-notes-off
command.
Disable Meters/Enable Meters
This command controls all meters in the system, including those in Mixer
windows, in control panels, and in the Resource Monitor. It switches between
Disable and Enable.
Disable Meters causes all meters to go blank. This can be used to free up host
CPU processing resources, if things are getting really tight–though this should
rarely be necessary.
Enable Meters returns all meters to normal functioning.
Quit
This command quits the OASYS PCI Editor. If there are unsaved Multis, you will
be prompted to save them.
112
Reference
OASYS PCI