8. Replace the lamp cover, then tighten its screws.
9. Reset the lamp timer as described in the next section.
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector's menu.
1. Press the
button on the remote control or on the
Menu
projector's control panel. You see the main menu.
2. Use the
pointer button on the remote control (or the arrow
buttons on the projector) to highlight
You see this screen:
3. Select
Reset Lamp Hours
4. When you see the prompt, select
5. When you're finished, press
, then press
Reset
and press
.
Enter
and press
Yes
Enter
to exit.
Menu
.
Enter
.
Maintaining the Projector
77