Starting The Projector With A Password - Epson PowerLite G5000 User Manual

4. Hold down the
Num
the numeric keypad to enter a four digit password. (The default
setting is 0000.)
5. When you see a confirmation message, reenter the password.
Then press the
Menu
To set security options, access the Password Protect screen as
described on page 54, and then turn on any of the following options:
■
Power On Protect
After the projector is plugged in and turned on, you must enter a
password to use the projector. For details, see "Starting the
Projector with a Password" below.
■
User's Logo Protect
settings from being changed. None of the User's Logo features in
the Extended menu can be changed when the User's Logo Protect
function is enabled. For details on creating a custom screen, see
page 56.
■ Network Protect
system.

Starting the Projector with a Password

When the password function is enabled, you see this screen when you
plug in and turn on the projector:
Hold down the button on the remote control and use the
Num
numeric keypad to enter the four digit password. The password screen
closes and projection begins.
button on the remote control and use
button to exit the screen.
to prevent unauthorized use of the projector.
to prevent your custom screen and display
to lock the Network settings in the menu
Hold down
note
If you leave the projector
plugged in, the Password
Protect Release screen will
not appear. It appears only
if you unplug and reconnect
the power cord.
Hold down
Fine-Tuning the Projector
55