Connecting To Video Equipment - Epson PowerLite G5000 User Manual
Epson powerlite g5000: user guide
Hide thumbs
Also See for PowerLite G5000:
- Quick reference card (7 pages) ,
- Declaration of conformity (4 pages) ,
- Installation handbook (3 pages)
Table of Contents
Advertisement
Setting Up the Projector
16
Connecting to Video Equipment
You can connect several video sources to the projector at the same
time. Before starting, look at your video equipment to determine its
available video output connections:
■
If your video player has a component video port (three connectors
labeled either Y/Cb/Cr or Y/Pb/Pr), see "Connecting a
Component Video Source" on page 19.
If your video player has a yellow RCA video output connector, or
■
if you're using a composite cable with a BNC connector, see
"Connecting a Composite Video Source" on page 17.
BNC connector
(component or
composite video)
■
If your video player has an S-video connector, see "Connecting an
S-Video Source" on page 18.
■
If your video player has an RGB video port (either a single
connector for a VGA monitor cable or three connectors labeled
R/G/B), see "Connecting an RGB Video Source" on page 20.
RCA connector
(composite video)
S-video
connector
VGA connector
(RGB video)
Advertisement
Table of Contents
