Epson PowerLite G5000 User Manual page 68

note
If a critical problem develops
with a projector which
causes it to suddenly stop
working, it may not be
possible for the projector to
send a message.
If Standby Mode is set to
in the
Network On
Extended menu, the
projector can still be
monitored even if the
projector is in standby mode
(when the power is off).
Managing Projectors
68
7. Select problems or warnings to be notified about by e-mail.
(Numbers 1 through 3 in this section correspond to the e-mail
addresses you entered.)
8. When you're done making all necessary changes, select
select
Setup complete
want to save the changes. Press
When the selected problem or warning occurs, an e-mail message is
sent to the specified notification addresses. The subject line of the
e-mail is
EPSON Projector
information:
Line 1: The name of the projector where the problem has
■
occurred
Line 2: The IP address of the projector where the problem has
■
occurred
Line 3: Details of the problem
■
, and then select to confirm that you
Yes
to exit the menu system.
Menu
. The e-mail includes the following
,
Return