Managing Projectors; Connecting To A Wired Network - Epson PowerLite G5000 User Manual

Managing Projectors

T
he software included with your projector lets you monitor and
control your projectors from a remote computer.
First connect and configure each projector you want to monitor. You
can connect the projector over a wired network as described in this
chapter.
Once you've connected the projectors to the network, you can use any
of these tools to manage your projectors:
■ Use EMP Monitor (available for Windows
projectors' status, switch image sources, turn projectors on and
off, control basic settings, and register projectors and projector
groups. See the EMP Monitor Operation Guide for more
information.
Use the mail notification function to receive e-mail alerts about
■
possible problems. See page 67 for more information.
This chapter covers the following information:
Connecting your projector to a wired network
■
■ Using e-mail alerts to warn you of problems

Connecting to a Wired Network

Follow these steps to connect the projector to your network and
configure it with an IP address:
1. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable. Connect the
cable to the port on the projector. See page 23.
LAN
2. Turn on the projector.
®
only) to see your
65
5