Connecting a Composite Video Source
1. If your video cable has an RCA connector, connect it to the
yellow video output connector on your player and the yellow
connector on the projector (as shown below). Or if you're
Video2
using a coax video cable, connect it to the
the projector.
2. To play sound, you can connect an optional stereo mini-jack
audio cable and optional external speakers (see page 21).
3. When you've finished making any connections, see page 24 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
connector on
Video1
note
If the video cable was not
provided with your video
device, you can purchase one
from an electronics dealer.
Setting Up the Projector
17