Restoring The Default Settings - Epson PowerLite G5000 User Manual

4. After highlighting the option you want to adjust, use the
pointer button to change the setting. In some cases, you may
have to press the
Enter
the setting.
Press the left or right side of the
■
a slider bar.
To select from two or more settings, use the
■
button to highlight the desired setting and press
5. After changing the settings, press the
changes and return to the previous menu (or press it repeatedly to
exit the menu system).
You can also press the

Restoring the Default Settings

You can use the menu system's Reset options to restore the factory-
default settings for all the settings listed in a specific menu, or all the
settings in all menus.
To restore the settings in a specific menu, open that menu, select
, and confirm as needed. (The example below shows how to
Reset
reset the Image menu.)
Reset settings
for current menu
Reset settings for
all menus
To restore all the projector settings to their factory-default values,
select the menu, highlight
Reset
button to view a sub-screen for changing
pointer button to adjust
button to save your
Esc
button to exit.
Menu
, and press
Reset All
pointer
.
Enter
note
When you select
in the Reset menu, it does
not reset the Input Signal,
User's Logo, Multi-screen,
Language, Lamp Hours, or
Network settings.
.
Enter
Fine-Tuning the Projector
Reset All
47