note
If you're a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you're monitoring.
Managing Projectors
66
3. Press the
button on the remote control, select the
Menu
menu, then press
Network
4. Choose
Wired LAN
5. Do one of the following:
■
If your network assigns addresses automatically, turn on the
setting.
DHCP
■
If your network does not assign addresses automatically, turn
off
and enter the projector's
DHCP
, and
Mask
Gateway Address
To enter numbers, use the
control to highlight the number you want to input, then press
.
Enter
6. When you're done making all necessary changes, select
, and then
Setup complete
the changes. Press
. You see the following screen:
Enter
and press
.
Enter
IP Address
.
pointer button on the remote
to confirm that you want to save
Yes
to exit.
Menu
,
Subnet
,
Return