S p l i t f r e q u e n c y t e s t
E q u i p m e n t n e e d e d
• Power supplies
• Laser head cable
• Laser Breakout Box
• BNC cable
• Frequency counter
P r o c e d u r e
1
2
3
Figure 12 Split frequency test setup
Agilent 5517B/BL/C/D/DL/FL User's Guide
Connect the laser head cable to the laser head, using the 18- pin
connector end of the cable shown in Figure12.
Connect the power- connector end of the laser head cable to the power
supply.
Connect the laser head LEMO connector to the Laser Breakout Box as
shown in Figure12, and connect the
Breakout Box to the
BNC
cable to Channel 1 on the frequency counter.
BNC
Performance Tests
connector from the Laser
4
35