Certain platform configurations may not support the full set of features provided by the Dell Lifecycle Controller.
NOTE:
For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware, and deploying the
operating system, see the Dell Lifecycle Controller documentation at Dell.com/idracmanuals.
Related references
Dell Lifecycle Controller
on page 64
Boot Manager
The Boot Manager screen enables you to select boot options and diagnostic utilities.
Related references
Boot Manager main menu
System BIOS
on page 38
Related tasks
Viewing Boot Manager
on page 65
Viewing Boot Manager
To enter Boot Manager:
Steps
1. Turn on, or restart your system.
2. Press F11 when you see the following message:
F11 = Boot Manager
If your operating system begins to load before you press F11, allow the system to complete the booting, and then restart your
system and try again.
Related references
Boot Manager
on page 65
Boot Manager main menu
Boot Manager main menu
Menu item
Description
The system attempts to boot to devices starting with the first item in the boot order. If the boot attempt
Continue Normal
fails, the system continues with the next item in the boot order until the boot is successful or no more
Boot
boot options are found.
Enables you to access boot menu, where you can select a one-time boot device to boot from.
One-shot Boot
Menu
Enables you to access System Setup.
Launch System
Setup
Exits the Boot Manager and invokes the Dell Lifecycle Controller program.
Launch Lifecycle
Controller
Enables you to launch System Utilities menu such as System Diagnostics and UEFI shell.
System Utilities
on page 65
on page 65
Pre-operating system management applications
65