12 X 3.5-Inch Hard Drive - Dell EMC PowerEdge R730xd Owner's Manual

Table 1. Front panel of the 24 x 2.5-inch hard drive/SSD PowerEdge R730xd chassis (continued)
Item Indicator, Button, or
Connector
4 Information tag
5
Hard drives
6 USB management port/iDRAC
Direct
7 Video connector
8 Quick Sync (optional)

12 x 3.5-inch hard drive

Figure 3. 12 x 3.5-inch hard drive chassis
1. System identification button
3. NMI button
5. Hard drives
7. Video connector
Table 2. Front panel of the 12 x 3.5-inch hard drive PowerEdge R730xd chassis
Item Indicator, Button, or
Connector
1 System identification button
Icon Description
Contains system information such as service tag, NIC, MAC
address for your reference. The information tag is a slide-out
label panel.
Up to twenty four 2.5 inch hot-swappable hard drives or solid
state drives (SSD).
The USB management port is USB 2.0 compliant. Enables you
to connect USB devices to the system or provides access
to the iDRAC Direct features. For more information, see the
Integrated Dell Remote Access Controller User's Guide at
Dell.com/idracmanuals.
Enables you to connect a display to the system.
Indicates a Quick Sync enabled system. The Quick Sync
feature is optional and needs a Quick Sync bezel. This feature
allows management of the system by using mobile devices.
This feature aggregates hardware or firmware inventory and
various system level diagnostic and error information that can
be used in troubleshooting the system. For more information,
see the Integrated Dell Remote Access Controller User's
Guide at Dell.com/idracmanuals.
2. Power button
4. Information tag
6. USB management port/iDRAC Direct
8. Quick Sync
Icon Description
Enables you to locate a particular system within a rack.
The identification buttons are located on the front and back
panels.
Press the system identification button to turn the system ID
on or off.
Dell PowerEdge R730xd system overview 11