Installing Batteries Into The Wheelchair - Invacare TDXSP2V User Manual

5. Disconnect the controller from the batteries at the rear
of the wheelchair.
6. Remove the two mounting screws D, washers E, and
locknuts F securing the battery tray stop bracket G
to the frame H.
7. Remove the battery tray stop bracket.
60101877-B
Fig. 7-6
8. Slide battery tray I with batteries out.
9. Disconnect the battery straps J.
Battery connection K located on top.
10. Disconnect batteries.
11. Remove the front L battery.
12. Slide the rear battery M forward and remove it from
the tray.

7.2.13 Installing Batteries into the Wheelchair

WARNING!
Risk of Serious Injury
Improperly installed battery tray can cause
instability resulting in serious injury.
– Ensure batteries and battery tray are installed
properly to maintain stability.
Controls System
Fig. 7-7
51