Table of Contents
Advertisement
7.2.4 How to Disconnect the Mobility Device After
Charging
1. Once charging is complete, disconnect the battery
charger from the power supply.
2. Disconnect the plug from the remote.
7.2.5 Storage and Maintenance
Follow the instructions listed below to ensure safe use and
longevity of the batteries:
•
Always store the batteries fully charged.
•
Do not leave the batteries in a low state of charge
for an extended length of time. Charge a discharged
battery as soon as possible.
•
In case your mobility device is not used for a longer
period of time (that is more than two weeks), the
batteries must be charged at least once a month to
maintain a full charge and always be charged before
use.
•
Avoid hot and cold extremes when storing. We
recommend to store batteries at a temperature of
59 °F (15 °C).
•
Gel and AGM batteries are maintenance-free. Any
performance issues should be handled by a properly
trained mobility device technician.
60101877-B
7.2.6 Using the Proper Batteries
WARNING!
Risk of Injury or Damage
Improper configuration of battery terminals may
cause injury or damage.
– Batteries with terminal configuration as shown
MUST be used.
– Terminals MUST have a cross hole in them as
shown.
– The POSITIVE (+) RED battery cable MUST
connect to the POSITIVE (+) battery
terminals/posts.
– The NEGATIVE (-) BLACK battery cable
MUST connect to the NEGATIVE (-) battery
terminals/posts.
– DO NOT allow any of your tools and/or battery
cables to contact both battery terminals at the
same time.
CAUTION!
Risk of Damage
Use of wrong battery type or size may cause
damage.
– DO NOT force a battery into place.
– Batteries with molded straps or flanges that
interfere with proper battery placement should
not be used.
– Use batteries listed in this manual for proper
replacement.
Controls System
45
Advertisement
Table of Contents
