Message
Connection to the POP3 server
I-Fax POP3 fails
failed.
A non-supported print cartridge
Indep.Sply.Prt.Cart.
is installed.
Paper has been jammed in the
Internal Misfeed
machine.
Memory has almost reached
Memory Almost Full
capacity during sort copy.
The data is too large or
Memory Overflow
complex to print.
Causes
• Confirm that the network cable is
• Confirm that the network settings such
Remove and replace it with a print
cartridge specified by an authorized
dealer.
Remove the jammed paper. See page 211
"Paper Feed Problems".
If several originals are still to be scanned,
it is recommended to start printing now,
and copy the remaining originals
separately. If originals are being scanned
from the ADF, remove any remaining
pages from the ADF.
• Select [600 × 600 dpi] in
• If using the PCL6 printer driver, set
Error and Status Messages on the Screen
Solutions
properly connected to the machine.
as IP address, DNS, and POP3
settings have been configured
properly (make sure that no double-
byte character is used). See
page 183 "Configuring the Network
Settings".
[Resolution] under [Printer Features]
to reduce the size of data. See
page 155 "Printer Features Settings".
[Resolution] in [Print Quality] to [600
× 600 dpi].
235