Ricoh Aficio SP 320 Series User Manual page 192

8. Configuring the Machine Using Utilities
Item
Channel
Wireless Signal Status
Wireless
Wireless LAN Settings
Item
SSID
Communication Mode
Ad-Hoc Channel
Authentication
Encryption
WPA Passphrase
WEP Key Length
WEP Transmit Key ID
WEP Key Format
190
Displays the channel information of the current wireless LAN settings if [Ad-
Hoc] is selected for [Communication Mode].
Displays the strength of the wireless signal that is being received.
Specifies whether or not to use the wireless LAN.
Enter the SSID of the access point.
The SSID can contain up to 32 characters.
When you click [Scan List], a list of available access points is displayed.
You can select the SSID from the list.
Select the mode to connect in.
If the machine will be connected to a wireless router or access point, select
[Infrastructure]. If the machine will be connected to a device equipped with
a wireless LAN directly, select [Ad-Hoc].
If [Ad-Hoc] is selected for [Communication Mode], select a channel.
Select an authentication method.
If [Ad-Hoc] is selected for [Communication Mode], you can select only
[Open System] and [Shared Key].
Select an encryption method.
If [Ad-Hoc] is selected for [Communication Mode], you can select only
[None ]and [WEP].
If [WPA2-PSK] or [Mixed Mode WPA/WPA2] is selected for
[Authentication], enter the WPA encryption key.
If [WEP] is selected for [Authentication], select 64 bits or 128 bits for the
length of the encryption key.
Select an ID number to identify each WEP key in case multiple WEP
connections are configured.
Select a format for entering the WEP key.
Description
Description