Resetting The Lamp Timer - Epson PowerLite 4100 User Manual

7. Once the lamp is fully inserted, tighten its screws.
8. Replace the lamp cover, then tighten its screws.
9. Reset the lamp timer as described in the next section.

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the
projector's menu.
1. Press the button on the remote control or on the
Menu
projector's control panel. You see the main menu.
2. Use the pointer button on the remote control (or the arrow
buttons on the projector) to highlight
You see this screen:
3. Select
Reset Lamp Hours
4. When you see the prompt, select
, then press
Reset
and press .
Enter
and press
Yes Enter
.
Enter
.
Maintaining the Projector
81