Connecting To A Wired Network - Epson PowerLite 4100 User Manual
Epson powerlite 4100: user guide
Hide thumbs
Also See for PowerLite 4100:
- Operator's manual (459 pages) ,
- Installation handbook (8 pages) ,
- Quick reference (7 pages)
Table of Contents
Advertisement
Using the Projector on a Network
44
Connecting to a Wired Network
With an Ethernet cable, you can connect the projector to your
network and configure it with an IP address.
1. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable. Connect the
cable to the
port on the projector as shown. To ensure
LAN
proper data transmission, use a shielded, Category-5 cable or
better.
2. Connect the other end to your Ethernet hub or router.
3. Turn on the projector.
4. Press the
button, select the
Menu
.
Enter
menu, then press
Network
Advertisement
Table of Contents
