Connecting to the Computer Port
You can connect to the projector using the VGA computer cable that
came with it (the monitor port on your computer must be a mini
D-sub 15-pin port).
1. If you're using the VGA computer cable, connect one end to the
projector's
Computer1
computer's monitor port.
2. You may need to change the
projector's Signal menu to
3. With the optional wireless mouse receiver (see page 39), you can
use the remote control as a mouse.
4. When you've finished making any connections, see page 23 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
port, and the other end to your
setting in the
Input Signal
(see page 59).
RGB
caution
Don't try to force a
connector to fit a port with a
different shape or number of
pins. You may damage the
port or connector.
Setting Up the Projector
17