Connecting To Video Equipment - Epson PowerLite 4100 User Manual

Connecting to Video Equipment

You can connect several video sources to the projector at the same
time. Before starting, look at your video equipment to determine its
available video output connections:
■ If your video player has a component video port (three connectors
labeled either Y/Cb/Cr or Y/Pb/Pr), see "Connecting a
Component Video Source" on page 21.
If you're using a coax video cable, see "Connecting a Composite
■
Video Source" on page 20.
If your video player has an RGB video port (either a single
■
connector for a VGA monitor cable or three connectors labeled
R/G/B), see "Connecting an RGB Video Source" on page 22.
BNC connector
(component or
composite video)
VGA connector
(RGB video)
Setting Up the Projector
19