Using The Remote Control; Controlling The Picture; Switching Between Picture Sources - Epson PowerLite 4100 User Manual

note
If a button is pressed longer
than 30 seconds, the remote
control stops operating to
conserve battery power.
When you release the
button, normal operation
resumes.
note
Using the remote under
bright fluorescent lamps or
in direct sunlight may affect
projector response.
Presenting With the Remote Control
36

Using the Remote Control

Make sure batteries are installed as described on page 82. Follow these
tips for using the remote control:
Point the remote control at the front of the projector or at the
■
screen.
Stand within 49 feet (15 meters) of the projector.
■

Controlling the Picture

You can use the remote control to preview and select your picture
sources, temporarily turn off the picture, freeze the action, and zoom
in on the picture.

Switching Between Picture Sources

If your projector is connected to more than one computer and/or
video source, you can switch between the different sources:
■ The easiest way to select your source is to press the
on the remote control (or the
projector) repeatedly until you see the image you want on the
screen.
On the remote control, you can press one of the
■
to select the connected device you need.
After you select a source, the screen goes dark for a moment before the
image appears.
Search
button on the
Source Search
Source
button
buttons