Setting The Remote Control Id - Epson PowerLite 4100 User Manual

note
When the remote control ID
switch is in the position,
Off
you can control any
projector regardless of the
projector or remote control
ID settings.
Presenting With the Remote Control
42

Setting the Remote Control ID

The remote control's default ID is zero. This lets you operate any
projector. To set it to operate a specific projector, follow these steps:
1. Move the remote control ID switch to the
2. Press and hold the
3. While holding the
remote control (0 through 9) to select the desired ID. Select zero
to control all projectors, or select a number to match the ID of the
projector(s) you want to operate.
button on the remote control.
ID
button, press a numbered button on the
ID
position.
On