Adjusting Signal Settings - Epson Megaplex MG-50 User Manual

Adjusting Signal Settings

Although the projector normally detects and optimizes the input signal automatically, you
can use the Signal menu to make manual adjustments. In addition to changing the position of
the projected image, you can correct sync for computer images, or change the aspect ratio.
1. Press the button and select the
Menu
those below. (The settings will be different depending on the source you are projecting
from.)
Computer/RGB video
Composite video
2. Adjust the desired options as needed:
■ Resolution
Set to to have the projector automatically identify the resolution of the input
Auto
signal. If necessary, select
images).
■ Noise Reduction
Reduces image flickering from progressive image signals. This setting can be set to
, , and
Off NR1
■ Video Signal
Sets the video input signal. For a list of compatible video formats, see page 75.
Signal
(for widescreen images) or
Wide
.
NR2
menu. You see a screen similar to one of
Component video
HDMI
Normal
(for 4:3 ratio
Adjusting Signal Settings
45