Installing The Usb Driver - Epson Megaplex MG-50 User Manual

Computer
port Cable
VGA Use a Mini D-sub, 15-pin monitor cable
to connect to a computer RGB
(monitor) port

Installing the USB Driver

You can send video and audio output to the projector through the computer's USB port
(MG-850HD only) if your computer meets the system requirements (see page 78).
1. Turn on your computer.
2. Connect the cable to your projector's USB
3. Connect the other end to any available USB port on your computer.
4. Do one of the following:
■ Windows 7/Windows Vista
appears to install the Epson USB Display software.
■ Windows XP
installs the Epson USB Display software on your computer.
■ Windows 2000
EMP_UDSE.EXE
■ Mac OS X:
The USB Display setup folder appears on your screen. Select U
Display Installer
Display Software.
Follow any on-screen instructions. You need to install this software only the first time you
connect your projector to your computer via USB. Once connected, the projector displays the
image from your computer's desktop and outputs sound, if your media contains audio.
: Select
: Wait as messages appear on your computer screen and the projector
: Select
Computer
to install the Epson USB Display software.
and follow the on-screen instructions to install the Epson USB
Projector port
port
TypeB .
Run EMP_UDSE.exe
> and then click
EPSON_PJ_UD
Connecting Computer Equipment
in the dialog box that
SB
29