Epson Megaplex MG-50 User Manual page 46

■ HDMI Video Range
When you connect to the HDMI input port, set the projector's video range to match
the video range setting of your device.
Note: The HDMI Video Range setting cannot be set for digital RGB signals.
■ Progressive
For composite video, component video, and certain signals from the HDMI port
only. Turn this setting on to convert interlaced signals into progressive signals (best
for moving images). Leave the setting
Note: You can adjust the Progressive setting for signals from the HDMI input port
(excluding digital RGB) or component video only when 480i/576i/1080i signals are being
input.
■ Aspect
Sets the image's aspect ratio (ratio of width to height). See page 34 for more
information.
■ Overscan
This setting lets you see the edges of the image that are not normally visible in the
picture. For component video formats, the options are
input, the options are
46
Making Detailed Adjustments
for still images.
Off
, , , and
Auto Off 4% 8%
, , and
Off 4%
.
. For HDMI
8%