Resetting The Projector - Epson Megaplex MG-50 User Manual

High Altitude Mode
meters) to ensure that the temperature is regulated properly. Turn this setting off for
lower elevations.
Note: Do not use the projector at altitudes above 7,500 feet (2,286 meters).
llumination:
button and the Ppower light. Use this setting if you find the lights distracting in a
darkened room.
■ Standby Microphone
Select
On
■ Plug-in Power
Select
On
■ Language
Select a language to use for the projector menus.
■ Reset
Resets the items in the
Language).

Resetting the Projector

If the image quality isn't what you expect, one or more settings may be adjusted improperly.
If necessary, you can restore the projector to its factory-default (original) settings.
To restore the settings in a specific menu (such as the Image or Settings menu), open that
menu, select
menu settings:
Open the Image
menu . . .
and select Reset
50
Making Detailed Adjustments
: Enable when you are using the projector above 4,921 feet (1,500
Turn off this setting to deactivate the light on the projector's Ppower
to enable the projector for microphone use when it is in standby mode.
when a microphone that supports plug-in power is connected.
Extended
, and confirm as needed. The example below shows how to reset the Image
Reset
menu to default values (except for User's Logo and