Table of Contents
Advertisement
DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuration
On the System / Configuration page, you can change the password for the administrator account
used to access the web-based interface of the router and to access the device settings via TELNET,
restore the factory defaults, backup the current configuration, restore the router's configuration from
a previously created file, save the changed settings to the non-volatile memory, reboot the device,
change the web-based interface language, or configure automatic reboot of the device on a
schedule.
In order to change the password for the administrator account, in the User section, enter a new
password in the New password and Password confirmation fields. Use digits, Latin letters
(uppercase and/or lowercase), and other characters available in the US keyboard layout.
Show icon (
) to display the entered values.
Remember or write down the new password for the administrator account. In case of losing
the new password, you can access the settings of the router only after restoring the factory
!
default settings via the hardware RESET button. This procedure wipes out all settings that
you have configured for your router.
16 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
Figure 167. The System / Configuration page.
Then click the SAVE button.
Page 212 of 236
Configuring via Web-based Interface
16
Click the
Advertisement
Table of Contents
