D-Link DIR-620S User Manual page 115

DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
In the Dynamic IPv6 Addresses section, you can configure IPv6 addresses assignment settings.
Figure 94. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Parameter
Mode of dynamic IPv6
address assignment
Start IPv6
End IPv6
Lease time
Dynamic IPv6 Addresses
Select the needed value from the drop-down list.
Disable: Clients' IPv6 addresses are assigned manually.
•
Stateful: The built-in DHCPv6 server of the router allocates
•
addresses from the range specified in the Start IPv6 and
End IPv6 fields. Also when this value is selected, the
Static IP Addresses section is displayed on the tab.
Stateless: Clients themselves configure IPv6 addresses
•
using the prefix.
The start IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The end IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The lifetime of IPv6 addresses provided to clients. The field is
available for editing if the Static value is selected from the Mode
of local IPv6 address assignment list in the Local IPv6
Address section.
Page 115 of 236
Configuring via Web-based Interface
Description