D-Link DIR-620S User Manual page 230

DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
In the opened window, you can specify the following parameters:
Parameter
MAC address
IP address
Name
Mode
After specifying the needed parameters, click the SAVE button.
To edit a rule for filtering, select a relevant line of the table, in the opened window, change the
needed values and click the SAVE button.
To remove a rule for filtering, select the checkbox located to the left of the relevant rule and click
the DELETE button (
After completing the work with rules, click the APPLY button.
The MAC address of a device from the router's LAN. You can enter
the MAC address of a device connected to the router's LAN at the
moment. To do this, select the relevant device from the drop-down
list (the field will be filled in automatically).
The IP address of a device from the router's LAN.
To assign several fixed IP addresses to a device with a certain MAC
address, click the ADD button, and in the line displayed, enter an IP
address. A device of your LAN can have one IPv4 address and
several IPv6 addresses.
To remove the IP address, click the Delete icon ( ) in the line of
the address.
Enter a name for the rule for easier identification. Optional.
Select an operating mode of the Yandex.DNS service for this rule.
Protection off: When this value is selected, the service
•
provides the DNS server with no restrictions on access to
unsafe web sites.
Safe: When this value is selected, the service blocks access
•
to malicious and fraudulent web sites.
Child: When this value is selected, the service blocks access
•
to malicious and fraudulent web sites and blocks access to
adult content.
). Also you can remove a rule in the editing window.
Page 230 of 236
Configuring via Web-based Interface
Description