Table of Contents
Advertisement
DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
IPv6
Go to the IPv6 tab to change the IPv6 address of the router, configure IPv6 addresses assignment
settings, or specify MAC address and IPv6 address pairs.
Figure 93. Configuring the local interface. The IPv6 tab. The Local IPv6 Address section.
Parameter
Mode of local IPv6
address assignment
IPv6 address
Prefix
Gateway IPv6 address
Local IPv6 Address
Select the needed value from the drop-down list.
Static: An IPv6 address and a prefix are specified manually.
•
Prefix delegation: The router requests a prefix to
•
configure an IPv6 address from a delegating router.
The IPv6 address of the router in the local subnet. By default, the
following value is specified: fd01::1. The field is available for
editing if the Static value is selected from the Mode of local IPv6
address assignment drop-down list.
The length of the prefix subnet. By default, the value 64 is
specified. The field is available for editing if the Static value is
selected from the Mode of local IPv6 address assignment
drop-down list.
Available if the Access point, Repeater, or Client mode was
selected the Initial Configuration Wizard.
The gateway IPv6 address which is used by the router to connect to
the Internet (e.g., for synchronizing the system time with an NTP
server). Optional.
Page 114 of 236
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
