Table of Contents
Advertisement
DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
IGMP
On the Advanced / IGMP page, you can allow the router to use IGMP.
IGMP is used for managing multicast traffic (transferring data to a group of destinations). This
protocol allows using network resources for some applications, e.g., for streaming video, more
efficiently.
The following elements are available on the page:
Parameter
Enable
IGMP version
Interface
Set the address of
outgoing IGMP packets
equal to 0.0.0.0
After specifying the needed parameters, click the APPLY button.
Figure 150. The Advanced / IGMP page.
IGMP
Move the switch to the right to enable IGMP.
Select a version of IGMP from the drop-down list.
From the drop-down list, select a connection of the Dynamic IPv4 or
Static IPv4 type for which you need to allow multicast traffic (e.g.
streaming video).
Move the switch to the right if you want all outgoing IGMP packets
to have the IP address 0.0.0.0.
Page 185 of 236
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
