Table of Contents
Advertisement
DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring Wireless Network
This configuration step is available for the 3G/LTE modem, Router, Access point, WISP
Repeater, and Repeater modes.
1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own
name for the wireless network or leave the value suggested by the router.
2. In the Password field, specify your own password for access to the wireless network or
leave the value suggested by the router (WPS PIN of the device, see the barcode label).
3. If the router is used as a Wi-Fi client, you can specify the same parameters of the wireless
network as specified for the network to which you are connecting. To do this, click the USE
button (available for the WISP Repeater and Repeater modes only).
4. You can restore the parameters of the wireless network specified before resetting to factory
defaults. To do this, click the RESTORE button.
Figure 49. The page for configuring the wireless network.
Page 61 of 236
Configuring via Web-based Interface
Advertisement
Table of Contents
