Labels - Epson LQ-2070 User Manual

Labels

When selecting labels for printing, always choose the type
mounted on a continuous backing sheet with sprocket holes for
use with a tractor. Do not try to print labels as single sheets
because the shiny backing sheet will not feed properly.
Load labels from either the front or bottom (not rear) paper slots
with the tractor in the pull tractor position. You load them the
same way that you load continuous paper, except you set the
paper thickness lever to position 2. See "Using Continuous Paper"
on page 2-9 for details.
Caution:
Neverfeed labels backward with the
Off/Bin
jam the
Since labels are especially sensitive to temperature and
humidity, use them only under normal operating
conditions.
Do
curl
printing.
To remove labels from the paper path after you finish
printing, first tear off the labels at a point before the paper
slot. Then use
labels out of the printer.
buttons. Labels can easily peel off the backing and
printer.
leave labels loaded in the printer
not
around the platen and
the LF/FF
Load/Eject
between
may jam when you resume
button to advance the remaining
Paper Handling 2-35
Tear
or
jobs; they