Removing Paper From The Tractor; Switching Between Continuous Paper And Single Sheets; Switching Between Continuous Paper And Single Sheets - Epson LQ-2070 User Manual

Removing paper from the tractor

1. To remove continuous paper, press the
the paper's perforation to the tear-off edge of the printer cover.
Note:
If the page perforation is not properly aligned with the tear-off edge,
you can adjust the tear-off position using Micro
Chapter 3.
2. Tear off the paper.
3.
Press the
backward out of the printer and into the standby position.
Caution:
Make sure you tear off your printed document before pressing the
Load/Eject
cause a paper jam.
Switching Between Continuous Paper and Single
Sheets
When using the push tractor in the front or rear position, you can
easily switch between continuous and single-sheet printing
without removing the paper.
2-30 Paper Handling
Load/Eject
button to feed the continuous paper
button. Reverse feeding several pages at a
Tear Off /Bin
button to feed
Adjust. See
time may