Loading Paper With The Pull Tractor - Epson LQ-2070 User Manual

11. Slide the left and right edge guides to the center of the paper
exit path. This helps prevent paper jams.
12. Turn on the printer. When the printer receives data, it
automatically loads the paper before printing.
Note:
Always close the printer cover before printing. The printer stops
printing when the cover is open.
You can also advance the paper to the loading position by
pressing the
As you print, make sure the paper advances behind the printer
guide as shown below. Also, make sure the paper path guide rests
against the paper guide.
Caution:
Do not use the knob on the right side
paper jams when the printer is turned off. Otherwise, you may
damage the printer or cause it to lose the top-of-form position.

Loading paper with the pull tractor

Note:
When you use this paperfeed path, you must first purchase the
optional tractor unit.
The standard rear push tractor cannot be removed.
To load continuous paper with the pull tractor, see the following.
2-24 Paper Handling
Load/Eject
button.
the printer except to clear
of