Printed Characters Are Not What You Expect; The Print Position Is Not What You Expect - Epson LQ-2070 User Manual

Printed
characters are
The typestyles or characters you sent with your software did
not print.
Check
that the
For instructions, see
Chapter 1.
The font selected on the control panel does not print.
Your software may be overriding your control panel setting.
Select the font in your software program.
The print position is not
Printing starts too high or too low on the page, or the bottom part
of one page is printed at the top of the next page.
You can adjust
the micro-adjust mode. See "Using Micro Adjust" in Chapter 3.
Page length does not match the length of the paper.
Check the page length set by your software and adjust it if
necessary.
If you are using continuous paper,
using Default
the
settings" in chapter 3.
Regular gaps occur in the printout.
Skip-over-perforation may be on. Set skip-over-perforation to
off in the default
settings" in Chapter 3.
6-6 Troubleshooting
what you expect
not
software is correctly configured for your printer.
Up Your Printer Driver" in
"Setting
what you expect
loading position using the
the
mode. See "Changing the default
Setting
mode. See "Changing
setting
LF/FF
the page length
change
default
the
button in