Epson LQ-2070 User Manual page 95

3. If the optional tractor is installed in the pull tractor position,
remove it. Make sure
Note:
the paper guide, optional pull tractor, and paper tension unit
Store
in a safe
place;
feeder.
cut-sheet
4. Gently
move
Warining:
Never move the printhead while the printer is turned on;
can damage the printer. Also, the print head may become hot
during use. Always let it cool before you touch
5. Hold the cut-sheet feeder in both hands and on both sides of the
feeder. Fit the notches over the mounting posts on the printer.
Lower the cut-sheet feeder until it rests on the printer.
6. Insert the cable into the connector as shown above.
7. Replace the printer cover.
You are now ready to load paper with your
remove the cut-sheet feeder, reverse the steps above.
paper tension unit is not installed.
the
you will need to reinstall them if you remove the
the print head to the ribbon installation position.
it.
feeder. To
cut-sheet
Using Printer Options
this
4-3