Using Quiet Mode; Using Micro Adjust - Epson LQ-2070 User Manual

Using Quiet Mode

The Quiet mode allows you to print with less noise, however
printing speed is reduced.
To enter Quiet mode, hold down the
buttons while turning on the printer.
You can only set this mode when you mm on the printer. You
cannot set this in the Default Setting mode. When you turn off the
printer, Quiet mode is canceled. Each time you want to use this
mode, you must turn the printer on as described in this section.

Using Micro Adjust

The Micro Adjust feature allows you to move paper forward or
backward in l/360-inch increments. You can use this feature to
adjust the loading and tear-off positions.
This section explains how to use Micro Adjust. See the next section
for information on adjusting the tear-off position.
The loading position is the position of the paper after it has been
automatically loaded by the printer. If your printing appears too
high or low on the page, you can change the loading position with
the Micro Adjust feature as follows:
1. Make sure the printer is turned on. If necessary, lift up the
printer cover so you can see the paper position.
2. Load either continuous or single-sheet paper. (Load continuous
paper by pressing the
3. Hold down the
light starts flashing.
Load/Eject
Pause
button for three seconds. The
Font Condensed
and
button.)
Using the Printer
Pause
3-13