Removing Paper From The Pull Tractor; Using Two Tractors In A Push And Pull Combination - Epson FX-2180 User Manual

9-pin dot matrix printer
Hide thumbs Also See for FX-2180:
Table of Contents

Advertisement

Removing paper from the pull tractor

1. After you finish printing, tear off the fresh supply of paper at
the perforation nearest the paper entry slot.
Hold down the LF/FF button to eject the paper from the printer.
2.
Caution:
c
Never press the Load/Eject button when using the pull tractor;
feeding the paper backward may cause it to come off the pull
tractor and jam the printer.

Using two tractors in a push and pull combination

To improve continuous paper feeding and reduce paper jams,
you can use two tractors at the same time. When using two
tractors in combination, you can load paper in the front paper
slot onto both the front push tractor and the pull tractor, or in
the rear paper slot onto both the rear push tractor and the pull
tractor.
2-30
Printing on Continuous Paper

Advertisement

Table of Contents
loading

This manual is also suitable for:

P920b

Table of Contents