Error Messages - Epson AcuLaser C8500 Quick Reference Manual

Error Messages

Messages Description
The printer has encountered
problems during duplex printing.
Make sure you are using an
appropriate type and size of paper
for the Duplex Unit. The problem
could also be a result of incorrect
settings for the paper source you
are using. Pressing the Continue
button will resume single-side
printing.
The paper size setting is different
from the size of paper loaded in the
printer. Check to see if the correct
size of paper is loaded in the
specified paper source, then press
the Continue button.
This message appears when
set to
feed unit with paper that matches
the
settings.
You have loaded media other than
transparencies when the Paper
Type setting in the printer driver is
Transparency. The printer stops
loading to prevent printer damage.
Load transparencies in the
specified paper source, then press
the Continue button.
is specified with
and there is no paper
and
Messages Description
Printing by specifying the number of
copies is no longer possible due to
a lack of memory (RAM) or free disk
space on the optional Hard Disk
Drive. If this error occurs, print only
one copy and end printing.
Cover A, the output path cover on
the left side of the printer, is open.
Close the cover and the error is
automatically cleared.
Cover D, the paper cassette cover
on the right side of the printer, is
open. Close the cover and the error
is automatically cleared.
Cover E, the cover on the right side
of the optional Large Capacity
Paper Unit, is open. Close the cover
and the error is automatically
cleared.
Cover F, the optional Duplex Unit's
inverter cover on the left side of the
printer, is open. Close the cover
and the error is automatically
cleared.
The printer's battery needs to be
replaced. Contact a qualified
service representative in your area.
You can continue printing despite
this message.
15 15 15 15