Epson AcuLaser C8500 Quick Reference Manual page 19

Color laser printer
Hide thumbs Also See for AcuLaser C8500:
Table of Contents

Advertisement

Messages
Description
The photoconductor unit has
reached the end of its service life.
Turn off the printer, then remove the
photoconductor unit and install the
new photoconductor unit.
The error clears itself once you have
replaced all the items and close all
printer covers. The photoconductor
level counter is automatically reset.
The waste toner collector is full of
toner. Replace it with a new waste
toner collector.
The error clears itself after you have
replaced the waste toner collector
and close the front cover.
Paper was forcibly output (blank
sheet printing) as the print data did
not arrive in time even though
paper was pre-fed.
Paper is loaded in the wrong
orientation in the standard lower
cassette. Remove the paper stack
from the standard lower cassette,
turn it by 90 degrees, and reload it
with the long edge first.
Paper is loaded in the wrong
orientation in the optional 500-
Sheet Paper Cassette Unit or the
Large Capacity Paper Unit.
Remove the paper stack from the
cassette, turn it by 90 degrees, and
reload it with the long edge first.
Messages
Description
The fuser unit is open. The error
automatically clears itself when the
fuser unit is closed properly.
The paper path unit is open. The
error automatically clears itself
when the paper path unit is closed
properly.
The optional Duplex Unit's main unit
is open. The error automatically
clears itself when the Duplex Unit's
main unit is closed properly.
The waste toner collector is nearly
full of toner. You can continue to
print until the
error message appears, but early
replacement is recommended to
maintain high print quality.
This message warns you that the
photoconductor unit is near the
end of its service life. You can
continue to print until the
appears, but early replacement is
recommended to maintain high
print quality.
You can clear this warning by
performing one of the following:
Pressing the Continue button.
Resetting the printer.
Replacing the photoconductor
unit.
error message
19
19
19
19

Advertisement

Table of Contents
loading

Table of Contents