Epson AcuLaser C8500 Quick Reference Manual page 17

Messages Description
The waste toner collector is not
installed, or is installed incorrectly. If
there is no waste toner collector
installed, install one into the printer.
If there is a waste toner collector
already installed, try removing it
and reinstalling it.
This message means that the printer
cannot communicate with the
installed optional interface card.
Turn off the printer, remove the
card, then reinstall it.
Either the optional Hard Disk Drive is
damaged or it cannot be used with
this printer. Turn off the printer and
remove the Hard Disk Drive.
An optional PostScript 3 ROM
module that cannot be used on this
printer is installed. Turn off the printer
and remove the module.
The printer cannot read the
/ installed optional ROM module.
Turn off the printer and remove the
ROM module.
If you try to print on media of overly
high density, the printer stops
loading the media to prevent
printer damage. In this case, you
need to clear any jammed media
from the MP tray or the paper path
unit.
Messages Description
The location where the paper jam
occurred is displayed at xxxx.
xxx represents an alphabet that
indicates the location of the error.
If a paper jam occurs at two or
more locations simultaneously, the
corresponding multiple locations
are displayed.
For more information, See
"Clearing Jammed Paper" on
page 6.
: The selected paper source is
indicated.
: The selected paper size is
indicated.
The printer is waiting for media to be
inserted manually.
The printer has insufficient memory
to execute the current task. To
correct the error, press the
Continue button on the control
panel.
This message appears if you try to
change the printer's settings
through the control panel when the
buttons are locked. You can unlock
them by using the EPSON WinAssist
utility or WebAssist. Refer to the
Administrator's Guide for Administrator's Guide Administrator's Guide Administrator's Guide
information.
17 17 17 17