Epson AcuLaser C8500 Quick Reference Manual page 9

2. Remove and tap the remaining paper stack on a flat
surface to even out the edges before reloading it
into the MP tray.
Clearing the output path cover (Jam A)
When there is paper jammed at the output path cover,
the LCD panel displays the
Follow these steps to clear paper jams in the output path
cover:
1. Open the output path cover on the left side of the
printer.
2. Remove any jammed paper gently with both
hands. Be careful not to tear the jammed paper.
z
Note:
Always try to remove jammed paper with both
hands to avoid tearing it.
If paper is torn, be sure to remove all torn pieces.
3. Close the output path cover.
error message.
When the paper jam is cleared completely and the
output path cover (cover A) is closed, the jammed
page's print data is automatically reprinted.
Clearing the fuser unit (Jam B)
When there is paper jammed at the fuser unit, the LCD
panel displays the
Follow these steps to clear paper jams in the fuser unit:
1. Pull the fuser unit out gently until it stops. Be
careful not to tear the jammed paper.
w
Warning:
Do not insert your hand deep into the fuser unit
(unit B) as some components are sharp and may
cause injury.
error message.
9 9 9 9